Cinch looks good and endures

Cinch doors and drawer fronts are superior to vinyl RTF doors. They are better looking because they’re assembled from five pieces, like traditional fine cabinetry. Corners are sharp and crisp. The grain pattern encircles the center panel, with appropriate direction on each piece of door molding. And the back of the door is an exact match to the front.

One-piece vinyl doors are assembled with hot-melt glue that can come apart from the fiberboard core when exposed to heat or moisture. Our doors will never fall apart when near an oven or dishwasher.


We offer complete refacing kits.

You can buy everything we offer, or pick and choose.

  • A variety of colors and door styles
  • Standard and soft-close hidden hinges, in multiple overlay
  • A broad selection of knobs and pulls
  • Primer and paint that match our doors
  • Screws, rubber bumpers, false front brackets, touch-up materials, and the other nuisance items required to finish a job
  • Jigs to easily and accurately drill doors for hardware
  • Matching skins for exposed cabinet sides




Door Features

  • Realistic wood textures
  • Front and back are a perfect match in color and texture, at no extra charge
  • A full ¾” thick
  • Heat resistant—won’t delaminate in transit or in use near an oven or dishwasher
  • Warp resistant—door warping is most often caused because one side of the door is a different material than the other. This means that heat and moisture penetrate the door at different rates, distorting the door’s core. Our doors resist warping because they are perfectly balanced with the same materials on the face and the back
  • Made of five separately-machined components, like all fine cabinetry, with appropriate grain direction on each piece
  • Crisp and clean square corners
  • Made in the USA


Duraluxe vs. Thermofoil Doors

Cinch’s Duraluxe doors won’t delaminate like vinyl RTF/thermofoil doors.  See why! 

See Duraluxe vs. Thermofoil

Colors

Flour

Warm white 

Avalanche

Bright white with an oak texture

Nimbus

Stylish light gray with wood grain and texture

Sable

Rich, cool brown with oak grain and texture

Espresso Walnut

Classic dark brown walnut grain

Styles

We offer two beautiful door styles.

Shaker

A timeless classic

Steps

An elegant riff on Shaker

Pulls and Knobs

Bar Pulls

Satin nickel finish. Solid Steel. Strong, clean lines. 12mm bar diameter (approx. ½”). Available in 5.3” and 4.5” overall length. Packaged with 1” and 1½” screws. Cinch provides 1¼” screws where needed for drawer fronts.

Tapered Arch Pulls

Satin nickel finish. Solid, die-cast zinc. Refined and classic. Available in 5.6” and 4.4” overall length. Packaged with 1” and 1½” screws. Cinch provides 1¼” screws where needed for drawer fronts.

Tapered Arch Pulls

Oil Rubbed Bronze. Solid, die-cast zinc. Refined and classic. Available in 5.6” and 4.4” overall length. Packaged with 1” and 1½” screws. Cinch provides 1¼” screws where needed for drawer fronts.

Bar Knob

Satin Nickel. 1.6” long. 12mm bar diameter (approx. ½”). Packaged with 1” and 1½” screws. Cinch provides 1¼” screws where needed for drawer fronts

Modern Knob

Satin Nickel. 1¼” diameter. Packaged with 1¼” and 1¾” screws.

Modern Knob

Oil Rubbed Bronze. 1¼” diameter. Packaged with 1¼” and 1¾” screws

Cabinet End Skins

1/8” thick end skins that perfectly match our door color and textures. These skins are designed to fit behind the face frame. Available in stock sizes. Not available in Flour.

Hinges

Our kits come with the option of a premium-grade soft-close hinge, matching paint, cabinet end skins, pulls, and screws, conveniently packaged and ready to install.

Soft-close, hidden hinges

These are top-of-the-line hinges. They provide a luxurious, gentle, near-silent closing action inaudible to neighboring apartments. Cam-adjustable in six directions, including vertically. Secured to the face frame by two screws. The soft-close mechanism can be switched on and off as desired. Lifetime warranty.

Standard, hidden hinges

Good quality hinges, made in the USA. Cam-adjustable forward and back and right to left. Vertical position adjustment is permitted by an elongated hole around a single screw mount to the cabinet face.

Bumpers

Our bumpers are sized to match our hinges, so when the door is closed it’s perfectly square to the cabinet face. Made of crack-resistant and resilient polyurethane with aggressive rubber adhesive. Sold in sheets of 55.


Paint

Our all surface enamel is engineered for exceptional durability and use on doors, trim, windows, and other hard wear areas. This high quality coating provides excellent resistance to weather and sunlight while maintaining its gloss and color.  As a waterborne coating, it offers easy cleanup until it cures. 


Painter's Tape

To protect adjacent surfaces when painting cabinet frames.


Touch-Up Markers

To protect adjacent surfaces when painting cabinet frames. Please include dimensions.

Installation Jigs

Jig for Door Hardware

Our door jig makes it easy to drill and mount knobs and pulls consistently on base and upper cabinet doors. Avoid the frustration and rework that comes from crooked hardware.

Mounting Tape

Double-sided mounting tape simplifies positioning a drawer front perfectly on a drawer box. Apply the mounting tape to the drawer front, and then align the front with the surrounding doors and drawers. Then press the front against the drawer box. The mounting tape will hold the proper position while you drive screws and install pulls. Clear, to be inconspicuous. 1” x 60” will position approximately 30 drawers.

Hardware

Screws - #6 x 5/8” flat head

High-quality, heat-treated screws for attaching hinges. Use Phillips or Posidrive screwdrivers. Sold in bags of 200.

Screws - #8 x 1” washer head

High-quality, heat-treated screws for attaching drawer boxes to drawer fronts with ½” hinge overlay. Use Phillips or Posidrive screwdrivers. Sold in bags of 60.

Screws -#8 x ¾” washer head

High-quality, heat-treated screws for attaching drawer boxes to drawer fronts with 1¼” hinge overlay and ½” drawer box construction. Use Phillips or Posidrive screwdrivers. Sold in bags of 60.

Screws 8/32 x 1¼” machine screws

High-quality, heat-treated screws for attaching pulls to drawer fronts. Use Phillips or Posidrive screwdrivers. Sold in bags of 30.

Warranty

Cinch is proud of our products, and we stand behind them. If any Cinch product fails during normal use within three years of purchase, we will provide a free replacement product. If a hinge or piece of hardware ever fails, we will send you a free replacement.

See Warranty

Product Specifications

The surface of our doors is a high-tech super film, manufactured in Europe. It is scratch and abrasion-resistant, stain-resistant, chemical resistant, light-fast and easy to clean. Water beads up and runs off. The material won’t fade or yellow. It’s unaffected by 212° dry heat or steam and contains no plasticizers or formaldehyde. The technical specifications are:

Performance Testing Protocol

  • Chemical resistance: 1C DIN 68861/1
  • Abrasion resistance: Min 400 turns Tabor abrasor CS 10
  • Water Resistance: Impervious to long term exposure
  • Dry Heat: Unaffected at 212 degrees Fahrenheit (100C) DIN 68861/7
  • Wet Heat (Steam) Unaffected at 212 degrees Fahrenheit (100C) DIN 68861/8
  • Lightfastness >5 ISO 4892-2 DIN EN 105 B 02

This high-performance film encases very stable core materials. You can feel the quality of the materials in the weight of the doors.

Our center panel cores are high-end particleboard. They are CARB phase two II Compliant (California Air Resources Board), so they meet the highest governmental standard for product quality. The board is made from the shavings of a lumber mill that makes structural lumber for home buildings. Because it contains 100% recycled/recovered fibers, it is Eco-Certified by the Composite Panel Association, signifying compliance with the highest industry measure of environmental responsibility. The particleboard also complies with ANSI A208.1-2009 specifications.

Our door moldings are machined from high-quality, very consistent fiberboard, made from southern yellow pine from sustainable managed forests. Like our center panels, they are CARB II compliant and made of 100% pre-consumer reclaimed fibers. These materials meet ANSI 208.2-2016 quality standards.

Our doors can contribute to both LEED and National Green Building Standard credits to certify your project as an example of excellent environmental stewardship. Contact CustomerService@CinchKit.com for more details about environmental credits.

Getting Started

Request a Sample

See the quality for yourself. Request a sample of a Cinch Cabinet Refacing Kit.

Get Sample

Credit Application

Ordering more than $2,500 in material? Apply for a Cinch credit account.

Get Application